Upcoming Classes

Listed below are our upcoming courses. If you're interested in a class not listed here, contact us at 563-441-4081 or toll free 1-866-419-6761.

Click here for registration information.

Accident Investigation Hazardous Waste Operations and Emergency Response (HAZWOPER) Refresher, 8 HR
Aerial Lift Safety Industrial Chemical Spill Response (8 HR OP Level)
Arc Flash Fundamentals Industrial Chemical Spill Response (Technical Level)
Behavior-Based Safety Industrial Chemical Spill Response Refresher
Bloodborne Pathogens in Industry Introduction to OSHA
Compressed Gas Machine Guarding Safety
Confined Space Awareness OSHA 10-Hour Construction Industry Outreach Training
Confined Space in Construction OSHA 30-Hour Construction Industry Outreach Training
Confined Space E&R OSHA 10-Hour General Industry Outreach Training
Cranes, Hoists and Rigging OSHA 30-Hour General Industry Outreach Training
Developing an Effective Safety and Health Program OSHA Control of Hazardous Energy Regulations (Lockout/Tagout)
Disaster Site Worker 7.5 HR OSHA Fall Protection
Disaster Site Worker 15 HR OSHA Hazard Communication Standard / GHS
DOT Required Hazardous Materials Training OSHA Recordkeeping Requirements
Drug and Alcohol Awareness Training Personal Protective Equipment
Drug and Alcohol Awareness Refresher Planning for Workplace Emergencies
Electrical Safety Work Requirements Principles of Ergonomics
Essentials of OSHA Compliance RCRA Awareness Training
Forklift Safety Scaffold Builder Training
Forklift Safety Supervisor Scaffold User Training
Forklift Operators Training Walking and Working Surfaces
Hazardous Waste Operations and Emergency Response (HAZWOPER), 40 HR When OSHA Comes Calling


ACCIDENT INVESTIGATION, 4 HR
Proactive safety - the aggressive pursuit of zero accidents - relies not only on knowledge of safe work principles and practices, but also on a positive attitude toward safety among all employees and managers. Topics include hazard recognition and classification; ergonomic hazards; accident investigation; performing safety audits; personal responsibility for safe work practices; and developing a positive attitude toward safety, which results in a readiness to respond effectively when a dangerous situation arises. A Safety Audit checklist will be provided to participants.

Cost: $85 Click here for registration information

#172469
Thursday, August 10, 2017
1:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185430
Thursday, December 7, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185433
Friday, March 3, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185488
Tuesday, June 26, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

AERIAL LIFT SAFETY, 2 HR
This course provides basic training on the safe operation of various types of aerial lifts such as man lifts, bucket trucks, boom lifts, articulating arm lifts, scissor lifts, and similar equipment. The course covers types of accidents involving aerial lifts, basic safe operating requirements for all types of aerial lifts, fall protection requirements, special requirements for boom type lifts and scissor lifts, and training requirements.

Cost: $40 Click here for registration information

#172435
Wednesday, May 10, 2017
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186077
Tuesday, October 24, 2017
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186078
Tuesday, April 24, 2018
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

ARC FLASH FUNDAMENTALS, 4 HR
This course will include the hazards and risks of working on or near energized electrical equipment. It will also discuss the procedures for preventing an arc flash accident, and how employees can protect themselves from arc flash hazards. This course will answer questions on the direction of current safety programs and how to incorporate new requirements into policies and procedures. Topics include a review of OSHA subpart S, hazards of electricity, approach boundaries for employees, effects of arc flash/blast, selecting PPE based on incident energy, and the NFPA 70E Tables of 103.7(c).

Cost: $85   Click here for registration information

#172432
Tuesday, May 9, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186079
Monday, September 18, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186080
Friday, January 26, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186082
Friday, May 4, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

BEHAVIOR-BASED SAFETY, 2 HR
This course is an introduction to Behavior-Based Safety (BBS) programs. Topics include a brief history, the principles of BBS, implementation and procedural steps, a review of BBS misconceptions, factors that shape human nature, continual safety improvement, training observers/coaches, and implementing safety observation procedures. Upon completion, participants will have an understanding of the BBS concept that encourages personal responsibility for safety from everyone in an organization, be able to identify the rewards of safe behavior, and avoid the pitfalls of affixing blame for unsafe behavior.

Cost: $40 Click here for registration information

TBA

(top)

BLOODBORNE PATHOGENS IN INDUSTRY, 2 HR
There are numerous pathogens that can be transmitted by contacting the blood or body fluids of an infected individual. This training is designed to inform workers on how to prevent exposure to bloodborne pathogens, how to react in emergency situations involving bloodborne pathogens, how to properly decontaminate a site, and what to do if a worker is exposed. This training will also cover proper labeling of potentially infectious materials and proper disposal of sharps and other potentially infectious waste.

Cost: $40 Click here for registration information

#186101
Wednesday, December 13, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186102
Thursday, May 31, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

COMPRESSED GAS
Compressed gas is used for many purposes from welding to purging piping systems.  Compressed air is also used to operate some equipment and tools. In accordance with OSHA's Hazardous Materials standard (29 CFR 1910 Subpart H), it is important to understand the hazards associated with compressed gases. This course will cover the importance of following safety rules when handling compressed gases and discuss the potential of fire and explosion hazards if not handled properly. Participants will learn proper labeling of cylinders, safe handling and storage of compressed gas cylinders, the dangers of compressed gases, and how to identify hazards to avoid injury.

Cost: $40 Click here for registration information

#186109
Tuesday, October 24, 2017
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

CONFINED SPACE AWARENESS, 2 HR
This course covers classroom instruction including hazards, monitoring, and permit systems entry and exit procedures. Regulations specific for supervisors, attendants, and entrants will be addressed. Entry equipment, ventilation equipment, retrieval systems, and monitoring equipment will be introduced to all participants.

Cost: $40 Click here for registration information

#186139
Friday, February 2, 2018
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186157
Friday, August 3, 2018
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

CONFINED SPACE ENTRY AND RESCUE, 4 HR
This course is a combination of hands-on training and classroom instruction covering hazards, monitoring, permit systems entry and exit procedures, and non-entry rescue techniques. This training provides regulations specific for supervisors, attendants, and entrants. Entry equipment, ventilation equipment, retrieval systems, and monitoring equipment will be used by all participants.

Cost: $85  Click here for registration information

#186167
October 5, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186168
April 26, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

CONFINED SPACE IN CONSTRUCTION
This course provides participants with information on the five key differences for confined space entry under the construction rule, as well as several areas where OSHA has clarified the existing requirements. Participants will learn the basic skills and knowledge about safe procedures for confined space entry and receive an overview of the permit required confined space regulation for construction, learn to recognize hazards presented by confined spaces, and learn to prepare a permit required confined space for safe entry.

Cost: $40 Click here for registration information

#172457
Tuesday, July 18, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#172464
Wednesday, August 9, 2017
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

 

CRANES, HOISTS, AND RIGGING, 2 HR
This course is designed for personnel who are involved in lifting, hoisting, and rigging operations using overhead cranes; monorails; and electric, pneumatic, hand chain, lever hoists, and various types of rigging and slings. This class addresses lifting devices and equipment safety requirements as outlined by the Occupational Safety and Health Administration. The students will not only gain competence in evaluating deficiencies and spotting safety related items, they will also learn to interpret Federal Regulations, National Standards, and Crane and Hoist Specifications. This course includes information about lifting devices and equipment commonly used for material handling and will focus on safe use of equipment; proper testing; and inspections, maintenance, and storage of equipment.

Cost: $40   Click here for registration information 

#172433
Tuesday, May 9, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount
Davenport, IA 52806

#186170
February 2, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186173
Friday, August 3, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

DEVELOPING AN EFFECTIVE SAFETY AND HEALTH PROGRAM, 4 HR
The keys to an effective safety and health program include an on-site safety committee and a thorough job hazard analysis. Participants will learn a step-by-step procedure for forming and managing an effective safety committee. Other topics include program development, planning and conducting meetings, job hazard analysis, accident investigation, and recordkeeping and reporting requirements. This course is designed for safety and health professionals, managers, team leaders, and others responsible for developing workplace safety and health programs.

Cost: $85  Click here for registration information

#172468
Thursday, August 10, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186175
February 14, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186176
Thursday, August 23, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

DISASTER SITE WORKER 7.5-HR
This training program is for Disaster Site Workers who provide, or may provide, skilled support services (e.g. utility, demolition, debris removal, hazardous materials response, or heavy equipment operation) or site clean-up services in response to natural and manmade disasters. Specifically, it is recognized that all workers at disaster sites need to be aware of the differences between disaster sites and regular construction or demolition worksites and be able to inspect, don, and doff air-purifying respirators. Also, the program will provide awareness to management and labor that pre-incident training is essential for ensuring disaster site workers' safety and health. Workers, supervisors, and managers tasked with providing support to first responders and cleanup operations need training and access to information that is timely and relevant in order to facilitate a safe and efficient disaster response operation. This is a shortened version of the 15 Hour Disaster Site Worker course. Pre-requisite: Completion of the 10- or 30-hour OSHA Construction or General Industry Outreach Training Program class before attending this class because OSHA's Disaster Site Worker course does not cover in detail the safety and health hazards that occur on a daily basis on a normal worksite.

Cost: $135  Click here for registration information

#186193
Monday, February 12, 2018
8:00 a.m. – 4:30 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

DISASTER SITE WORKER 15-HR
This training program is for Disaster Site Workers who provide, or may provide, skilled support services, (e.g. utility, demolition, debris removal, hazardous materials response, or heavy equipment operation) or site clean-up services in response to natural and manmade disasters.
Specifically, it is recognized that all workers at disaster sites need to be aware of the differences between disaster sites and regular construction or demolition worksites and be able to inspect, don, and doff air-purifying respirators. Also, the program will provide awareness to management and labor that pre-incident training is essential for ensuring disaster site workers' safety and health. Workers, supervisors, and managers tasked with providing support to first responders and cleanup operations need training and access to information that is timely and relevant in order to facilitate a safe and efficient disaster response operation. Pre-requisite: Completion of the 10- or 30-hour OSHA Construction or General Industry Outreach Training Program class before attending this class because OSHA's Disaster Site Worker course does not cover in detail the safety and health hazards that occur on a daily basis on a normal worksite.

Cost: $250  Click here for registration information

#186195
Thursday – Friday, September 7-8, 2017
8:00 a.m. – 4:30 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186198
Tuesday – Wednesday, July 31-August 1, 2018
8:00 a.m. – 4:30 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)


DOT REQUIRED HAZARDOUS MATERIALS TRAINING, 8 HR
This course serves as the required training and refresher for shippers and handlers of hazardous materials. Topics include using a hazardous materials table, shipping papers, and preparation of packages for shippers and handlers. Participants are encouraged to bring questions and problems for class discussion.

Cost: $135  Click here for registration information

#156862
Monday, July 17, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185419
Tuesday, October 3, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185424
Wednesday, January 24, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185428
Tuesday, July 24, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

DRUG AND ALCOHOL TRAINING AWARENESS, 2 HR
The purpose of Iowa's drug testing law (Iowa Code Section 730.5, paragraph 9.h. and Administrative Code Section 640) is to enhance worker safety by creating workplaces that are free of drugs and substance abuse. One tool available to private sector employers is drug testing (inclusive of alcohol testing). A private sector employer who chooses to use this tool must attend a minimum of two hours of initial training to begin, and a minimum of one hour annual update training. This training meets the initial two hour training requirement and includes information concerning the recognition of evidence of employee alcohol and other drug abuse, the documentation and corroboration of alcohol and drug abuse, and the referral of employees who abuse alcohol or other drugs to the employee assistance program or to the resource file maintained by the employer pursuant to paragraph "c", subparagraph (2) of the Iowa Code. This course satisfies the requirements for supervisor training.

Cost: $40 Click here for registration information

#172459
Thursday, August 3, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186203
Thursday, November 2, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186211
Thursday, February 1, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186217
Thursday, May 3, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186220
Thursday, August 2, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

DRUG AND ALCOHOL AWARENESS REFRESHER, 1 HR
The purpose of Iowa's drug testing law (Iowa Code Section 730.5, paragraph 9.h. and Administrative Code Section 640) is to enhance worker safety by creating workplaces that are free of drugs and substance abuse. One tool available to private sector employers is drug testing (inclusive of alcohol testing). A private sector employer who chooses to use this tool must attend a minimum of two hours of initial training to begin, and a minimum of one hour annual update training. This training meets the one hour annual refresher training requirement and includes information concerning the recognition of evidence of employee alcohol and other drug abuse, the documentation and corroboration of alcohol and drug abuse, and the referral of employees who abuse alcohol or other drugs to the employee assistance program.

Cost: $30  Click here for registration information

#172460
Thursday, August 3, 2017
3:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186222
Thursday, November 2, 2017
3:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186223
Thursday, February 1, 2018
3:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186224
Thursday, May 3, 2018
3:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186225
Thursday, August 3, 2018
3:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806


(top)

ELECTRICAL SAFETY WORK REQUIREMENTS, 4 HR
This course is an introduction to the National Electrical Code (NEC), National Fire Protection Association recommendations (NFPA), and OSHA's Electrical Standards related to employee safety. Also included are the effects of electricity on the human body and personal protective equipment. This course is designed to enhance safety awareness for anyone who works with or around electrical equipment..

Cost: $85  Click here for registration information

#186226
Thursday, October 5, 2017
1:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186227
Thursday, April 26, 2018
1:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

ESSENTIALS OF OSHA COMPLIANCE, 7 HR
Having a safe workplace environment is more than just good business practice - it's the law. This course offers the cost-effective solutions you need to keep your people safe in the workplace. You'll quickly develop an understanding of employer's and employee's rights and responsibilities when it comes to ergonomic issues, toxic chemicals, hazardous materials, on-the-job accidents, employee threats, dangerous equipment, bloodborne pathogens, and much more. You'll get a comprehensive update on the very latest in OSHA's ever-changing requirements, and you'll also find out innovative ways that other organizations are successfully using to meet these stringent standards. You'll gain an understanding of the basics of OSHA recordkeeping, learn how to avoid the top 10 most common OSHA violations, and get tips for using proactive safety audit tools to prevent accidents from happening.

Cost: $135  Click here for registration information

TBA

(top)

FORKLIFT SAFETY, 2 HR
This course will cover mechanics, inspection, and maintenance of forklifts; ANSI driving procedures; special operating rules; stacking and tiering; and refueling procedures. Driving is not included.

Cost: $40  Click here for registration information

#172453
Tuesday, July 18, 2017
2:00 p.m. – 4:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186242
Monday, October 23, 2017
2:00 p.m. – 4:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186245
Thursday, January 25, 2018
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186246
Wednesday, April 25, 2018
2:00 p.m. – 4:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186248
Wednesday, July 18, 2018
2:00 p.m. – 4:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806


(top)

FORKLIFT SAFETY SUPERVISOR, 1 HR *
* Prerequisite: Forklift Safety
In this one-hour class, the supervisor will learn the training requirements pertaining to various types of Industrial Powered Trucks, requirements when there is an employee incident or accident, and how to conduct driving skill audits. This class follows the Forklift Safety class, which is a prerequisite.

Cost: $30  Click here for registration information

#172452
Tuesday, July 18, 2017
1:00 p.m. – 2:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186250
Monday, October 23, 2017
1:00 p.m. – 2:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186265
Thursday, January 25, 2018
10:00 a.m. – 11:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186269
Wednesday, April 25, 2018
1:00 p.m. – 2:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186271
Wednesday, July 18, 2018
1:00 p.m. – 2:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

(top)

FORKLIFT OPERATOR'S TRAINING, 4 HR
This course is designed to meet the training requirements for OSHA standard 29 CFR 1910.178. Training topics include mechanics, inspection, and maintenance of forklifts; ANSI driving procedures; lift operation, and special operating rules. This course is the same as Forklift Safety, but also includes a driving module that allows participants to operate a forklift.
 
Cost: $85  Click here for registration information

#172444
Thursday, May 11, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#172446
Tuesday, June 20, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#172451
Tuesday, July 18, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#172462
Tuesday, August 8, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186229
Friday, September 8, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186230
Monday, October 23, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186231
Monday, November 6, 2017
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186232
Monday, November 6, 2017
12:30 p.m. – 4:30 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186233
Friday, March 30, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186234
Friday, March 30, 2018
12:30 p.m. – 4:30 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186235
Wednesday, April 25, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186236
Friday, May 11, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186237
Thursday, June 21, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186238
Wednesday, July 18, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

#186240
Monday, August 13, 2018
8:00 a.m. – 12:00 p.m.
Blong Technology Center
8500 Hillandale Road
Davenport, IA 52806

(top)

HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE (HAZWOPER), 40 HR
OSHA regulations under 29 CFR 1910.120 requires 40 hours of safety training for hazardous wastesite workers and supervisors involved in activities that expose or potentially expose them to hazardous substances and health hazards above permissible levels. This hands-on course covers all regulations.

Cost: $595  Click here for registration information

#185328
Monday – Friday, September 11-15, 2017
8:00 a.m. – 5:00 p.m. Daily
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185329
Monday – Friday, March 26-30, 2018
8:00 a.m. – 5:00 p.m. Daily
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806


(top)

HAZARDOUS WASTE OPERATIONS AND  EMERGENCY RESPONSE (HAZWOPER) REFRESHER, 8 HR
This course is the annual refresher for both the technician level Industrial Chemical Spill Response and 40-Hour Hazardous Wastesite Worker courses. It fulfills the requirement for both workers and supervisors.

Cost: $135  Click here for registration information

#172431
Friday, May 5, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#172445
Monday, June 19, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#172458
Wednesday, July 19, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#172461
Monday, August 7, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185272
Wednesday, September 6, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185273
Monday, October 9, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185280
Thursday, November 16, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185281
Friday, December 8, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185285
Monday, January 22, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185288
Thursday, February 15, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185290
Friday, March 9, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185294
Friday, April 13, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185297
Wednesday, May 2, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185299
Friday, June 22, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185302
Monday, July 23, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185303
Tuesday, August 21, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

INDUSTRIAL CHEMICAL SPILL RESPONSE (TECHNICAL LEVEL), 24 HR
This course provides training for industrial hazmat and spill response teams, and industrial emergency response personnel as outlined in OSHA 29 CFR 1910.120(q). Hands-on exercises in full protective equipment are conducted.

Cost: $350  Click here for registration information

#185337
Wednesday-Friday, October 11-13, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185338
Monday-Wednesday, April 9-11, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

INDUSTRIAL CHEMICAL SPILL RESPONSE (8-HOUR OP LEVEL)
This course provides participants the knowledge and skills necessary to ensure the safety of response personnel when taking action to contain and control releases of hazardous materials as well as response to disaster events that have impacted the workplace and community. This course is intended for awareness and operations level responders. This training will aid employers in compliance with state and federal regulations applicable to spill and disaster response cleanup.

Cost: $135  Click here for registration information

#186283
Friday, November 3, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186284
Friday, February 23, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186285
Monday, May 21, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186287
Friday, August 24, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

INDUSTRIAL CHEMICAL SPILL RESPONSE REFRESHER, 8 HR
This course is the annual refresher to the Industrial Chemical Spill Response course. The session provides training for industrial hazardous materials and spill response teams, and industrial emergency response personnel as outlined in OSHA 29 CFR 1910.120(q). Hands-on exercises in full protective equipment are conducted. Fulfills the requirement for both technician and operations level personnel.

Cost: $135  Click here for registration information

#172449
Friday, July 14, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185332
Wednesday, October 4, 2017
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185333
Tuesday, January 23, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185335
Thursday, April 12, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185336
Friday, July 13, 2018
8:00 a.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

INTRODUCTION TO OSHA, 4 HR
This course is for people with little or no knowledge of OSHA regulations who need this information because of their job responsibilities. Participants will be led step-by-step through the Code of Federal Regulations (29 CFR 1910) "Safety and Health Standards for General Industry." An explanation of the main standards and their application will be given.

Cost: $85 Click here for registration information

#186288
Wednesday, February 14, 2018
1:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186291
Thursday, August 23, 2018
1:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

MACHINE GUARDING SAFETY, 2 HR
Machine guarding is one of the most violated OSHA standards. This course emphasizes the consequences of removing or disabling guards; guard classifications and how they work, including enclosure, interlocking and disabling guards; and an overview of lockout/tagout requirements.

Cost: $40 Click here for registration information

#172434
Tuesday, May 9, 2017
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186302
Friday, February 2, 2018
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186305
Friday, August 3, 2018
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA 10-HOUR CONSTRUCTION INDUSTRY OUTREACH TRAINING, 10 HR
This course will cover construction safety and health principles and OSHA policies, procedures, and construction industry standards. Special emphasis is placed on the most hazardous areas using OSHA standards as a guide. This course is taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a card from OSHA verifying their completion of the course.

Cost: $180 Click here for registration information

#172448
Wednesday-Thursday, July 12-13, 2017
1:00 p.m. – 5:00 p.m.  July 12  |  8:00 a.m. – 3:00 p.m.  July 13
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185349
Tuesday-Wednesday, November 14-15, 2017
1:00 p.m. – 5:00 p.m.  Nov 14  |  8:00 a.m. – 3:00 p.m.  Nov 15
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185351
Tuesday-Wednesday, January 16-17, 2018
8:00 a.m. – 4:30 p.m. Jan 16  |  8:00 a.m. – 10:30 a.m. Jan 17
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185352
Monday-Tuesday, March 5-6, 2018
8:00 a.m. – 4:30 p.m. Mar 5  |  8:00 a.m. – 10:30 a.m. Mar 6
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185353
Wednesday-Thursday, July 11-12, 2018
1:00 p.m. – 5:00 p.m.  July 11  |  8:00 a.m. – 3:00 p.m.  July 12
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA 30-HOUR CONSTRUCTION INDUSTRY OUTREACH TRAINING, 30 HR
This four-day course is an in-depth presentation of the OSHA construction regulations and their implementation at job sites. Topics include OSHA standards; recordkeeping; safety, health and environmental controls; fire prevention; personal protective equipment; hand and power tools; scaffolding; and excavations. This course is taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a card from OSHA verifying their completion of the course.

Cost: $540 Click here for registration information

#185359
Tuesday-Friday, January 16-19, 2018
8:00 a.m. – 4:30 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185360
Monday-Thursday, March 5-8, 2018
8:00 a.m. – 4:30 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA 10-HOUR GENERAL INDUSTRY OUTREACH TRAINING, 10 HR
Participants will learn how nine major provisions of the Occupational Safety and Health Act (OSHA) can be implemented in the workplace. Topics include common violations; inspections, citations, and penalties; walking and working surfaces; means of egress and fire protection; hazardous materials; material handling; electrical safety; and machine guarding. This course will be taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a card from OSHA verifying their completion of the course.

Cost: $180 Click here for registration information

#172429
Monday-Tuesday, May 1-2, 2017
8:00 a.m. – 4:30 p.m.  May 1  |  8:00 a.m. – 10:30 a.m.  May 2
Midwest Center for Public Safety Training
8228 N. Fairmount
Davenport, IA 52806 (Use 8200 N. Fairmount St. when using GPS)

#172447
Tuesday-Wednesday, July 11-12, 2017
8:00 a.m. – 3:00 p.m. July 11  |  8:00 a.m. – 12:00 p.m. July 12
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185363
Monday-Tuesday, September 25-26, 2017
8:00 a.m. – 4:30 p.m. Sept 25  |  8:00 a.m. – 10:30 a.m. Sept 26
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185367
Monday-Tuesday, November 13-14, 2017
8:00 a.m. – 3:00 p.m. Nov 13  |  8:00 a.m. – 12:00 p.m. Nov 14
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185372
Tuesday-Wednesday, May 15-16, 2018
8:00 a.m. – 4:30 p.m. May 15  |  8:00 a.m. – 10:30 a.m. May 16
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185375
Tuesday-Wednesday, July 10-11, 2018
8:00 a.m. – 3:00 p.m. July 10  |  8:00 a.m. – 12:00 p.m. July 11
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA 30-HOUR GENERAL INDUSTRY OUTREACH TRAINING, 30 HR
This course is a more in-depth version of the OSHA 10-Hour General Industry Outreach Training course. Participants will learn how the provisions of the Occupational Safety and Health Act (OSHA) can be implemented in the workplace. Topics include common violations, inspections, citations and penalties, walking and working surfaces, means of egress and fire protection, hazardous materials, material handling, electrical safety, and machine guarding. Participants will learn to locate and read standards and understand how to identify specific safety and health issues. This course will be taught by an OSHA-authorized instructor. Participants who successfully complete the course will receive a card from OSHA verifying their completion of the course.

Cost: $540 Click here for registration information

#172430
Monday-Thursday, May 1-4, 2017
8:00 a.m. – 4:30 p.m.  Daily
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185416
Monday-Thursday, September 25-28, 2017
8:00 a.m. – 4:30 p.m.  Daily
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#185417
Tuesday-Friday, May 15-18, 2018
8:00 a.m. – 4:30 p.m.  Daily
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA CONTROL OF HAZARDOUS ENERGY REGULATIONS (LOCKOUT/TAGOUT), 2 HR
OSHA's Control of Hazardous Energy (Lockout/Tagout) Standard 29 CFR 1910.147 requires employers to establish a program for energy control procedures. Topics include requirements of the Control of Hazardous Energy standard, physical locks and tags, safe lockout procedures, and training requirements. Assistance with developing a written Hazardous Energy Control Plan is given.

Cost: $40  Click here for registration information

#172466
Wednesday, August 9, 2017
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186330
Friday, February 2, 2018
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186333
Friday, August 3, 2018
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)


OSHA FALL PROTECTION, 2 HR
Topics will include OSHA requirements under 29 CFR 1926 Subpart M, housekeeping, floor and wall openings, stairways and stairway railings, ladders and scaffolds, fall arrest systems and limitations of safety equipment, controlled access zones, and fall protection plans.

Cost: $40  Click here for registration information

#172436
Wednesday, May 10, 2017
10:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186334
Tuesday, October 24, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186335
Tuesday, April 24, 2018
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA HAZARD COMMUNICATION STANDARD / GHS, 3 HR
1910.1200 requires employers to develop a Written Hazard Communication Program for their employees and to inform and train them on the chemical hazards in the workplace. This course provides an overview of the standard, new GHS label elements and SDS format conforming to the United Nations Globally Harmonized System of Classification, Safety Data Sheets (SDS) collection and retention, in-house labeling, placarding systems, proper storage procedures, employee training, and documentation..

Cost: $75  Click here for registration information

#172475
Monday, August 14, 2017
8:00 a.m. – 11:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186337
Thursday, December 14, 2017
8:00 a.m. – 11:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186338
Wednesday, April 4, 2018
8:00 a.m. – 11:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186339
Wednesday, August 22, 2018
8:00 a.m. – 11:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

OSHA RECORDKEEPING REQUIREMENTS, 3 HR
OSHA regulations require all employers to document employee training and to keep records of employee injuries and illnesses. A new final rule for recordkeeping requirements requires some industries to submit electronic filings by July 1, 2017. Beginning in 2019, annual electronic filings must be completed by March 1. Other topics covered include the revised standard for Occupational Injury & Illness documentation, Safety Data Sheets, training documentation, and OSHA posters and other required postings. Record location, retention, and maintenance will also be covered. Participants will receive and learn how to use a self-audit checklist. This class is for human resource managers, safety managers, and those responsible for OSHA compliance.

Cost: $75  Click here for registration information

#172470
Friday, August 11, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186341
Thursday, December 7, 2017
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186343
Friday, March 2, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186344
Tuesday, June 26, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

PERSONAL PROTECTIVE EQUIPMENT, 3 HR
Selection and use of Personal Protective Equipment (PPE) is an important aspect of job safety. Topics include hazard assessment, types of protection such as safety glasses and respirators, training requirements, and PPE written programs. OSHA's recently adopted Fall Protection Standard is also discussed.
 
Cost: $75  Click here for registration information

#172467
Wednesday, August 9, 2017
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186348
Monday, September 18, 2017
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186349
Friday, January 26, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186351
Friday, May 4, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

PLANNING FOR WORKPLACE EMERGENCIES, 2 HR
Workplace emergencies can happen at any time and we should prepare for them. It is hard to think clearly during an emergency and it is essential to plan your response. This training module will provide you with a basic understanding of managing workplace emergencies and establishing an incident management system to effectively and safely respond to emergency and disaster situations.

Cost: $40  Click here for registration information


#172472
Friday, August 11, 2017
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)



PRINCIPLES OF ERGONOMICS, 4 HR
This course covers the use of ergonomic principles to prevent musculoskeletal disorders. Topics include physiology; anthropometry; video display terminals; and risk factors such as vibration, temperature, material handling, repetition, and lifting. Job hazard analysis and design of work stations and equipment will be key features of this program. Employer responsibility under General Duty 5(a)(1) of the proposed Ergonomic Standard will be discussed.

Cost: $85  Click here for registration information

#186353
Wednesday, December 13, 2017
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186354
Thursday, May 31, 2018
8:00 a.m. – 12:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

RCRA AWARENESS TRAINING, 3 HR
This RCRA compliance course is designed for large and small quantity generators and may satisfy both initial and annual refresher training requirements as specified in 40 CFR 265.16. The Resource Conservation and Recovery Act (RCRA) requires that facility personnel be trained to "perform their duties in a way that ensures the facility's compliance" with hazardous waste regulations. This course includes a regulatory overview, how to identify RCRA solid wastes, managing hazardous waste containers, waste storage requirements, manifest preparation and recordkeeping, and worker protection.

Cost: $75  Click here for registration information

#172476
Monday, August 14, 2017
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186355
Thursday, December 14, 2017
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186356
Wednesday, April 4, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186357
Wednesday, August 22, 2018
1:00 p.m. – 4:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)


SCAFFOLD BUILDER TRAINING, 6 HR
§1926.32(f) "The competent person must have the ability to recognize hazards associated with the activity. The competent person must be thoroughly trained in safe procedures, OSHA regulations, and other safety practices associated with the activity." This course is designed to train the scaffold user in safely erecting and altering scaffolds, as well as instruction on performing daily inspections. This class will bring the user's level of knowledge up to that of a competent person. This course will cover types of access scaffolds, standards and regulations, foundation requirements, platforms and platform materials, scaffold erection procedures, safety procedures during erection, tools, and personal protective equipment.

Cost: $125   Click here for registration information

TBA

(top)


SCAFFOLD USER TRAINING, 2 HR
§1926.454(a) "The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards." This course is designed to train the scaffold user in recognition of hazards associated with the type of scaffold being used, procedures to control or minimize hazards, electrical hazards, fall hazards and falling object hazards, as well as the proper use of the scaffold and handling materials on scaffolds.

Cost: $40   Click here for registration information

#172440
Wednesday, May 10, 2017
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186358
Tuesday, April 24, 2018
8:00 a.m. – 10:00 a.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)

WALKING AND WORKING SURFACES, 2 HR
Slips, trips, and falls are the top contributor to injuries in general industry. These incidents are responsible for 15% of all accidental deaths (second only to automobile accidents). Topics in this course will include OSHA requirements under 29 CFR 1910 Subpart D, housekeeping, floor and wall openings, stairways and stairway railings, ladders and scaffolds, controlled access zones, and an overview of fall arrest systems and the limitations of this equipment.

Cost: $40  Click here for registration information

#172437
Wednesday, May 10, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186359
Tuesday, October 24, 2017
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

#186360
Tuesday, April 24, 2018
3:00 p.m. – 5:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)


WHEN OSHA COMES CALLING, 2 HR
When the OSHA inspector arrives, an employer has certain rights and responsibilities. Learn what you, as an employer, can do to be prepared for an inspection, what the inspection involves, how to respond to questions, what records need to be readily available, what the most common citations are and how they are connected, and what you can do if OSHA issues a citation.

Cost: $40  Click here for registration information

#172471
Friday, August 11, 2017
1:00 p.m. – 3:00 p.m.
Midwest Center for Public Safety Training
8228 N. Fairmount (Use 8200 N. Fairmount St. when using GPS)
Davenport, IA 52806

(top)